SparkFun XBee Wireless Kit

$95.95 (as of December 11, 2017, 9:43 am)

Xbee kit including Xbee Shield, Explorer board and 2 XBee modules
Kit allows for simple serial cable replacement
DIN and DOUT pins of XBee can be connected to either the UART pins or any digital pin on the Arduino (D2 and D3 default)

Usually ships in 24 hours

Category: Tag:
Description

This it the SparkFun XBee Wireless Kit, the perfect box full of goodies to get you started using XBees. Inside this kit you will find two XBee Modules, one XBee Explorer, one Xbee Shield and a set of R3 headers to solder onto the shield. Our entire goal for the XBee Kit was to make wireless communication simple. Connect one XBee to the shield and your Arduino, connect the other XBee to the Explorer board and your computer, and you’ll be able to seamlessly pass serial data to and from your Arduino wirelessly! Using this connection, you can transmit remote sensor data, or send data from your computer to update a scoreboard, or drive a robot from your keyboard!

The XBee Shield mates directly with an Arduino Pro or USB board, and equips it with wireless communication capabilities using the popular XBee module. This is SparkFun’s own design and is a distant relative to the official XBee Shield from Arduino.

The serial pins (DIN and DOUT) of the XBee are connected through an SPDT switch, which allows you to select a connection to either the UART pins (D0, D1) or any digital pins on the Arduino (D2 and D3 default). Power is taken from the 5V pin of the Arduino and regulated on-board to 3.3VDC before being supplied to the XBee. The shield also takes care of level shifting on the DIN pin of the XBee.

The board also includes LEDs to indicate power and activity on DIN, DOUT, RSSI, and DIO5 pins of the XBee. The Arduino’s reset button is brought out on the shield, and a 12×11 grid of 0.1″ holes are available for prototyping.

Kit includes:

1x XBee Shield

1x XBee Explorer USB

2x XBee Modules

1x Arduino Stackable Header Kit – R3

Xbee kit including Xbee Shield, Explorer board and 2 XBee modules
Kit allows for simple serial cable replacement
DIN and DOUT pins of XBee can be connected to either the UART pins or any digital pin on the Arduino (D2 and D3 default)
3.3V power regulation and level shifting on-board
Arduino R3 Footprint

Amazon Customer Reviews
Additional Information
Binding

Brand

EAN

EANList

IsAutographed

IsMemorabilia

ItemDimensions

Label

Manufacturer

PackageDimensions

ProductGroup

ProductTypeName

Publisher

Studio

UPC

UPCList

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “SparkFun XBee Wireless Kit”

Your email address will not be published. Required fields are marked *